CentOS 7错误找不到git bash command not found linux

安装好 VestaCP 控制面板后,在配置Monit监控程序时:

git clone https://github.com/infinitnet/vesta-centos7-monit.git ./ && rm -f README.md

出现错误提示:

-bash: git: command not found
  • git bash command not found 表示 Linux 找不到此命令。

解决方法:

  1. 启用 EPEL 存储库
  2. 安装 git 命令

启用EPEL存储库

RHEL/CentOS 7 64位:

wget http://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
rpm -ivh epel-release-latest-7.noarch.rpm

RHEL/CentOS 6 32位:

get http://dl.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
rpm -ivh epel-release-6-8.noarch.rpm
  • CentOS 7 不支持 32位 EPEL 存储库,所以用,RHEL/CentOS 6 32位的。

安装 git 命令

yum install -y git

以下是安装git命令的过程中,所出现的内容:

Resolving Dependencies
--> Running transaction check
---> Package monit.x86_64 0:5.25.1-1.el7 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

========================================================================================================================================================================
 Package Arch Version Repository Size
========================================================================================================================================================================
Installing:
 monit x86_64 5.25.1-1.el7 epel 318 k

Transaction Summary
========================================================================================================================================================================
Install 1 Package

Total download size: 318 k
Installed size: 818 k
Is this ok [y/d/N]: y
Downloading packages:
monit-5.25.1-1.el7.x86_64.rpm | 318 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
 Installing : monit-5.25.1-1.el7.x86_64 1/1
 Verifying : monit-5.25.1-1.el7.x86_64 1/1

Installed:
 monit.x86_64 0:5.25.1-1.el7

Complete!
[root@ten ~]# cd /etc/monit.d/
[root@ten monit.d]# git clone https://github.com/infinitnet/vesta-centos7-monit.git ./ && rm -f README.md
-bash: git: command not found
[root@ten monit.d]# myip=web.etufo.org
[root@ten monit.d]# sed -i 's/host localhost/host '$myip'/g' /etc/monit.d/*.conf
[root@ten monit.d]# systemctl restart monit
[root@ten monit.d]# ^C
[root@ten monit.d]# yum install -y git^C
[root@ten monit.d]# cd /root
-bash: $'55cd': command not found
[root@ten monit.d]# cd /root
[root@ten ~]# yum install -y git
Resolving Dependencies
--> Running transaction check
---> Package git.x86_64 0:1.8.3.1-12.el7_4 will be installed
--> Processing Dependency: perl-Git = 1.8.3.1-12.el7_4 for package: git-1.8.3.1-12.el7_4.x86_64
--> Processing Dependency: perl(Term::ReadKey) for package: git-1.8.3.1-12.el7_4.x86_64
--> Processing Dependency: perl(Git) for package: git-1.8.3.1-12.el7_4.x86_64
--> Processing Dependency: perl(Error) for package: git-1.8.3.1-12.el7_4.x86_64
--> Processing Dependency: libgnome-keyring.so.0()(64bit) for package: git-1.8.3.1-12.el7_4.x86_64
--> Running transaction check
---> Package libgnome-keyring.x86_64 0:3.12.0-1.el7 will be installed
---> Package perl-Error.noarch 1:0.17020-2.el7 will be installed
---> Package perl-Git.noarch 0:1.8.3.1-12.el7_4 will be installed
---> Package perl-TermReadKey.x86_64 0:2.30-20.el7 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

========================================================================================================================================================================
 Package Arch Version Repository Size
========================================================================================================================================================================
Installing:
 git x86_64 1.8.3.1-12.el7_4 updates 4.4 M
Installing for dependencies:
 libgnome-keyring x86_64 3.12.0-1.el7 base 109 k
 perl-Error noarch 1:0.17020-2.el7 base 32 k
 perl-Git noarch 1.8.3.1-12.el7_4 updates 53 k
 perl-TermReadKey x86_64 2.30-20.el7 base 31 k

Transaction Summary
========================================================================================================================================================================
Install 1 Package (+4 Dependent packages)

Total download size: 4.6 M
Installed size: 23 M
Downloading packages:
(1/5): perl-Error-0.17020-2.el7.noarch.rpm | 32 kB 00:00:00
(2/5): perl-Git-1.8.3.1-12.el7_4.noarch.rpm | 53 kB 00:00:00
(3/5): perl-TermReadKey-2.30-20.el7.x86_64.rpm | 31 kB 00:00:00
(4/5): libgnome-keyring-3.12.0-1.el7.x86_64.rpm | 109 kB 00:00:01
(5/5): git-1.8.3.1-12.el7_4.x86_64.rpm | 4.4 MB 00:00:01
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total 3.3 MB/s | 4.6 MB 00:00:01
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
 Installing : 1:perl-Error-0.17020-2.el7.noarch 1/5
 Installing : perl-TermReadKey-2.30-20.el7.x86_64 2/5
 Installing : libgnome-keyring-3.12.0-1.el7.x86_64 3/5
 Installing : perl-Git-1.8.3.1-12.el7_4.noarch 4/5
 Installing : git-1.8.3.1-12.el7_4.x86_64 5/5
 Verifying : git-1.8.3.1-12.el7_4.x86_64 1/5
 Verifying : 1:perl-Error-0.17020-2.el7.noarch 2/5
 Verifying : libgnome-keyring-3.12.0-1.el7.x86_64 3/5
 Verifying : perl-Git-1.8.3.1-12.el7_4.noarch 4/5
 Verifying : perl-TermReadKey-2.30-20.el7.x86_64 5/5

Installed:
 git.x86_64 0:1.8.3.1-12.el7_4

Dependency Installed:
 libgnome-keyring.x86_64 0:3.12.0-1.el7 perl-Error.noarch 1:0.17020-2.el7 perl-Git.noarch 0:1.8.3.1-12.el7_4 perl-TermReadKey.x86_64 0:2.30-20.el7

Complete!

最后,看到 “Complete”,即表示完成安装 git 命令了 ^_^